> >RF kontrolér SPI pre digitálne LED pásy RGB Skydance-SC

LED pásy Digital RGB - DC5V, DC12V

Certifikáty

ROHS CE
RF 2,4GHz - SPI kontrolér pre digitálne LED pásy RGB Skydance Zväčšiť
Predchádz. Ďalej

RF kontrolér SPI pre digitálne LED pásy RGB Skydance-SC

Skydance-Set-SPI-SC

Nový produkt

  • RF 2,4GHz kontrolér pre LED PIXEL digitálne pásy s riadiacim signálom SPI 
  • Dokáže ovládať takmer všetky druhy digitálnych čipov s napájaním s 1 aj 2 vodičmi
  • 32 prednastavených dynamických efektov
  • Dokáže riadiť 8 až 1024 bodov
  • Možnosť spárovania až 10 DO s jednym kontrolérom
  • Napájanie DC 5-24V
  • Max. zaťaženie 8A

Viac detailov

Tovar je na sklade

28,00 EUR s DPH


23,33 EUR bez DPH

Pridať do zoznamu želaní

Tabuľka dát

Rozmery kontroler L97×W33×H18mm
Vstupné napätie DC 5V-24V
Váha kontroler 39g

Detaily

● Mini-style RF 2.4G multi-pixel RGB controller with SPI output, match with Skydance’s 2.4G RGB/RGBW remote control.
● Compatible with 31 kinds digital IC RGB or RGBW LED strip, IC type and R/G/B order can be set.
Compatible ICs: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909,
UCS2912, WS2811,WS2812, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B, SK6812, UCS8904B,
LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822.
● 32 kinds dynamic mode, include horse-race, chase, flow, trail or gradual change style.

Input voltage 5-24VDC
Power consumption 1W
Input signal SPI(TTL)
Output signal 2 group SPI (TTL) signals
Operation temperature Ta: -30 °C ~ +55 °C
Case temperature (Max.) Tc: +85°C
IP rating IP20
Control dots Max 1024 pixels

Note:


● If the SPI LED pixel strip is single-wire control, the DATA and CLK output is same, we can connect up to 2 LED strips.

Match Remote Control

Match:
Short press match key, immediately press on/off key of the remote.
Delete:
Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.

Dynamic mode list

No. Name No. Name No. Name
P01 Red horse race white ground P12 Blue White chase P23 Purple float
P02 Green horse race white ground P13 Green Cyan chase P24 RGBW float
P03 Blue horse race white ground P14 RGB chase P25 Red Yellow float
P04 Yellow horse race blue ground P15 7 color chase P26 Green Cyan float
P05 Cyan horse race blue ground P16 Blue meteor P27 Blue Purple float
P06 Purple horse race blue ground P17 Purple meteor P28 Blue White float
P07 7 color multi horse race P18 White meteor P29 6 color float
P08 7 color horse race close + open P19 7 color meteor P30 6 color smooth sectionally
P09 7 color multi horse race close + open P20 Red float P31 7 color jump sectionally
P10 7 color scan close + open P21 Green float P32 7 color strobe sectionally
P11 7 color multi-scan close + open P22 Blue float

Compatible IC type

No. IC type Output signal
1 TM1803 DATA
2 TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,
UCS2903,UCS2909,UCS2912,WS2811,WS2812		 DATA
3 TM1829 DATA
4 TLS3001,TLS3002 DATA
5 GW6205 DATA
6 MBI6120 DATA
7 TM1814B(RGBW) DATA
8 SK6812(RGBW) DATA
9 UCS8904B(RGBW) DATA
10 LPD6803,LPD1101,D705,UCS6909,UCS6912 DATA,CLK
11 LPD8803,LPD8806 DATA,CLK
12 WS2801,WS2803 DATA,CLK
13 P9813 DATA,CLK
14 SK9822 DATA,CLK

Use R9 remote set SPI digital LED strip

● Set LED strip length [Pixel number(8~1024)]. * + 3 number + * for example:
*032*, set pixel number to 32.
*600*, set pixel number to 600.
*1024*, set pixel number to 1024.
● Set LED strip chip type. * + 2 number + *
*11*：TM1803
*12*：TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,UCS2903,UCS2909,UCS2912,
WS2811,WS2812
*13*：TM1829
*14*：TLS3001,TLS3002
*15*：GW6205
*16*：MBI6120
*17*：TM1814B(RGBW)
*18*：SK6812(RGBW)
*19*：UCS8904B(RGBW)
*21*：LPD6803,LPD1101,D705,UCS6909,UCS6912
*22*：LPD8803,LPD8806
*23*：WS2801,WS2803
*24*：P9813
*25*：SK9822
● Set LED strip RGB order. * + 1 number + *
*1*：RGB, *2*：RBG, *3*：GRB, *4*：GBR, *5*：BRG, *6*：BGR.

Účet